Skip to main content

Posts

Showing posts with the label Technical Notes

Naked Raku

In the end of January I have attended a Naked Raku workshop in Thomastown organised by  Ceramics Ireland . I already was familiar with both Raku and Naked Raku but wanted to extend my knowledge in this field. Naked Raku is a firing technique in which the pot is masked with the slip and then glazed and fired @ 1000 C then the kiln is opened and pots are transferred to the reduction chamber filled with sawdust, and covered to accommodate the reduction process. The difference between the Raku and Naked Raku is that in the second process the glaze is pealed off after firing and the pot unglazed- Naked. It all seems quite confusing and a bit complicated but in fact it is very simple, fast and effective way of decorating ceramics. The only disadvantage is that the pot is porous and can be use only as decoration as it is not food safe. With time the smoke marks can get lighter which can be slowed down by applying oil or floor polish paste on pots. ...

Ceramic Tips

I decided to share my tips with the world - or at least with those who read this blog. Over my 2 years in studio I have learnt some useful tricks maybe you know them already :)  1.  Talc is super useful (I was using pure talc the one you add to glazes but I think you can try it with baby talc as well) :  slipcasting - brush the inside of your mould with a thin layer of talc and your casts will relise easily each time :) But   it can also develop a shiny glaze like surface when fired on porcelain ( I didn't try it on other clay bodies) so plan before you use it and make sure the bottom part of your work in talc free as it can stack to the kiln shelf; 'glazing'- if you want nice shiny finish on porcelain brush a layer of talc on green body - clay has to be a bit wet so talk can stick to it. It's just a matter of practice to find out the perfect stage of clay and amount of talc you need. 2. Single firing  For over a year I was...

Fiber + casting slip + Aga =??????

In the meantime I started to work with fiber-clay made of the casting slip- and this one is even stronger and looks more promising :) First I have prepared the porcelain casting slip which wasn't that hard as I thought it will be. There are just few simply steps to do it: 1. Get a bucket (big one) and put 2l of water 2. Dissolve 26g of dispect in 600ml of HOT water then add to the bucket  3. Cut porcelain in small pieces and put them into the water so they are well covered 4. When you have about 1/4 of a porcelain bag already in the bucket start mixing everything with the big blender :)  5. Add more porcelain to the mixture slowly until it will become nice and smooth. I have mixed the casting slip with nylon fiber ( 1l+ 20g) and then dried it on the plaster bat.                        Simple archers are collapsing a bit but I hope to learn how to con...

1...2...3... testing...testing...

This week was a great challenge for me... I had tried to build my units out of porcelain, paperclay and finally fibreclay. In the beginning nothing worked - the curvy strips were getting straight when they dried or they weren't strong enough to build with them. Even now I still don't know how they will turn out after firing. Porcelain moves a lot in the kiln and I like it but this time I have to find a way to compromise it's desire to move with my idea of form I would like to achieve. Here are some of my test from this week. I am planning to fire them on Friday so the results will be on Monday. Please keep your fingers crossed for me :) This are just porcelain tests the middle one was a W and that's what is left of it after few hours. The last piece and the cylinder probably will collapse in the kiln... Well we'll see :) Now that's paperclay. As you can see on the bottom photo it also went flat after joining two pieces. I really hope the middle...

Porcelain Paperclay

I still don't know exactly how my finished pieces are going to look like but I know that I want to make something light and translucent. That is why I had decided to work in porcelain.  Some of the forms can be too difficult to construct in porcelain without risking that they will collaps in the kiln.  In order to overcome this obstacle I had prepared some paperclay which is lighter and hopefully will keep the shape better.  First I cut porcelain in small pieces and let them get bone dry. Then I crushed them even more and added water to make smooth slip. When I had porcelain slip prepared I teared up some toilet paper and soaked it in hot water. After some time I sieved it and mixed with porcelain slip.

Moulds

Finally I have made some moulds for this project. Mould making isn't my strongest skill and to be honest I don't like it at all, I just like using moulds :) I had used the models that I have made earlier and here are photos of some of the results.

Clay and plaster models.

The last week was quite hard for me as I got stuck with my project and wasn't sure which direction I should go. I wanted to do something in clay that will reflect my plastic models but then I felt that I should do something different. As usual in this type of situation I spent hours just looking at what was straight in front of my nose and kept asking myself ' What to do next?? And how to do it??' I finally have made few pinch pots - will add photos next week when I'll get back home. When I was making them I have realised that it's not what I want to do but will use them anyway - you never know where the next idea is going to come from. Last few days I was stragling with making moulds- I don't like making them but I know I need them :). I spent two days trying to get around mould-making but in the end was forced to do it. So far I have prepared  some plaster models. I am in Poland now, just for the week and will post some info about International...